A vehicle diagnostic program that performs various checks and tests on vehicles or modules. The functions offered are: reset and programming functions, graphic data display, pin switching, actuator tests, etc. CSV data files importing is also available.
Multiecuscan is a powerful and reliable vehicle diagnosis application that supports various models of hardware interfaces required to connect to the cars' electronic systems. Besides the ubiquitous OBDKey and OBDLink models, Multiecuscan can be used with KL (former VagCom 409), the popular ELM327 OBD microcontroller, and CANtieCAR interfaces. Therefore it can be used for a large variety of cars, from VAG-supported ones (Volkswagen, Audi, SEAT, and Skoda), to Renault, Peugeot, Suzuki, Ford, Toyota, Jeep, Chrysler, Lancia, Dodge, and so on.
Multiecuscan comes in three editions, and the free one of these comes with various licensing restrictions and less available features. For example, parameter monitoring while executing an actuator test is not supported in the free version of Multiecuscan. On the other hand, the free edition of Multiecuscan still supports plenty of cool features and functions. For example, it can read ECU identification, can clear fault codes and read diagnostic data for the free modules, can export the data to CSV files, and more. There are also detailed descriptions of various parameters, errors, and other data, even in the free edition, and in multiple languages. Last but not least, you can run a simulation ECU scanning mode without an actual hardware interface to see what kind of results this tool usually provides before actually putting it to work.
In conclusion, Multiecuscan remains an undeniably handy vehicle diagnosis tools as it offers a lot of advanced functions and it’s easy-to-use.
v4.7 [Nov 22, 2020]
- Added information for more ISO codes from 2012-2020 vehicles.
- Fixed PROXI alignment problem with DSCM and TBM modules on Stelvio/Giulia.
- Fixed PROXI alignment problem with 1.0/2.4 engine modules on 500x/Renegade/Cherokee/Compass.
- Added new PROXI configuration options.
- Improved SCAN function to scan much faster the CAN-only vehicles.
- Added VIN and HW/SW numbers to SCAN results.
- Support for Radio frequency hub (RFHUB) Continental (Giulia, Stelvio).
- Support for Comfort rear seat (CRSM) Bitron (Giulia, Stelvio).
- Support for Active aerodynamic module LEFT (AAML) (Giulia, Stelvio).
- Support for Active aerodynamic module RIGHT (AAMR) (Giulia, Stelvio).
- Support for Power liftgate (PLGM) BROSE (Stelvio).
- Support for Radio frequency hub (RFHUB) Continental (500X, Renegade, Toro).
- Support for Radio frequency hub without keyless (RFHUB) Continental (500X, Renegade, Toro).
- Support for Haptical lane feedback (HALF) camera Bosch (500X, Renegade, Toro).
- Support for Driver assistant system (DASM) radar Bosch (500X, Renegade).
- Support for Radio frequency hub (RFHUB) Continental (Compass).
- Support for Blind Spot Sensor Autoliv (Left) (Compass).
- Support for Blind Spot Sensor Autoliv (Right) (Compass).
- Support for Marelli SELESPEED CFC419F Automatic Gearbox (Uno 2015, Mobi).
- Support for Marelli SELESPEED CFC428F Automatic Gearbox (Uno 2015).
- Support for Parking control Bosch (Uno 2015, Mobi).
- Support for Body Computer Continental (327) (Uno 2015).
- Support for Body Computer Continental (341) (Uno 2015, Mobi).
- Support for Driver assistant system (DASM) radar Bosch (Tipo, Egea).
- Support for TRW Airbag (Uno 2015, Mobi).
Configuration and monitoring for temperature controllers, power controllers, and recorders
